Submit Request

  • This field is for validation purposes and should be left unchanged.

What is a speed bump?

Speed ​​bumper is an obstacle to reducing the speed of cars, which is installed in different areas. Typically, this traffic barrier is most used where vehicles and pedestrians are close. Places such as schools, crosswalks, bus stops, shopping centres and similar items are included in the areas with speed bumps. In general, the speed bumper is installed to protect the safety of pedestrians. By reducing the car’s speed in these areas, there is enough time for the driver and the pedestrian to make the right decision in case of a problem. Still, without this obstacle, we may see daily accidents in the mentioned areas.

To pass this traffic barrier, the driver must reduce the speed of his car to 20 km/h from the speed limit. This amount of deceleration and the slow passage of the car through the speed bump allows pedestrians to decide to pass. If the vehicle does not slow down while passing these traffic obstacles, it may cause damage to the car. The level of damage is directly related to the speed of the vehicle. This means that the higher the car rate when passing the speed bumper, the more damage to the car will be.

Different types of speed bumps in terms of size

Today, there are various types of traffic safety equipment used in road traffic projects, speed control and prevention of road and intercity accidents in the consumer market, depending on multiple factors such as geographical location, climatic conditions, and the amount of vehicle traffic. And many other factors will be prepared and used. Some of the commonly used equipment in this field are:

Rubber speed bumps 60×50 cm

One of the most widely used types of speed bumps used in places with heavy vehicle traffic and tropical climate is the 50 x 60 cm rubber speed bump. This type of speed bumper is made of high-quality, durable and flexible rubber. It can bear a maximum weight of 50 tons. One of the remarkable and critical features of this type of speed bumper is its affordable price and easy disassembly and repair.

33 x 90 cm plastic speed bumps with soles, screws and dowels

Another type of speed bumper used in high-traffic places is a 90 x 33 cm plastic speed bumper with soles, screws and dowels. The camera has a height of 5 cm and is 90 x 33 cm. It is designed and made available to consumers using polyethylene plastics resistant to impact, weather and environmental changes. Quick and easy installation, easy transportation and very resistant material are among the most important reasons for the popularity of this type of speed bumper in the population of different types of traffic safety equipment.

Plastic speed bumps 25×35 cm

25 x 35 cm plastic speed bumps are another type of small-size speed bump used in moderate weather and high-traffic areas. This type of traffic safety equipment is made of PVC plastic. It will be installed at four and a half centimetres to control the speed of regular vehicles using screws and dowels in the desired area.

Plastic speed bumps 12×33 cm

One of the slightest speed bumps used to control the traffic safety of urban roads is a plastic speed bump measuring 12 x 33 cm with a weight of 310 grams and a height of 4 cm. This type of traffic safety equipment is made of copolymers that are very resistant to weather changes, impact and other environmental changes and is very popular for installation in urban streets. The unique design of this type of plastic speed bumper and having small and large lines and ridges are among other critical features to prevent wear and increase the life of safety equipment.

Types of traffic speed bumps based on ingredients

Accelerators are divided into three categories based on the raw materials that make them up. These types include plastic, rubber, and asphalt speed bumpers.

Plastic speed bumper

The material of this traffic barrier is made of rigid polyethylene and has excellent pressure resistance. Plastic speed bumps are produced like pieces of a puzzle. Then, based on the width of the desired street, they are installed next to each other. Therefore, when a bit is broken or separated, it can be quickly removed and replaced, and there is no need to replace and repair the entire speed bumper. This action also saves the cost of repair.

Rubber speed bumper

Unlike other types of speed bumps, rubber speed bumps are better compatible with car tires. The rubber and flexible material of the rubber speed bumper has the advantage of causing less damage to the car when the car collides with this traffic obstacle. In scorching weather conditions, the asphalt may crack. Still, the rubber speed bumper can withstand up to 50 tons of load because it is very lightweight and flexible.

Asphalt speed bump

The most economical type of speed bumper is the model made of asphalt. It is possible to save significantly in constructing this traffic barrier, but shaping the asphalt into a speed bump is difficult.

The use of speed bumper and the need to use it

Speed ​​bumpers are one of the road safety equipment that is used all over the world to reduce the speed of vehicles. Buying a speed bumper on roads and places where the maximum speed of cars does not exceed 15 km/h is recommended. Parking lots and shopping malls are the best places to install a speed bumper, and installing it in areas and roads with public transportation is not recommended. It is against the law to install speed bumps on all streets except parking lots. Installing speed bumps near residential areas and places where there is a lot of children’s traffic, near schools and where students pass increases people’s safety.

Advantages of using speed bumps

The use of speed bumps, such as road, urban, one-way, etc., in addition to advantages, also has disadvantages, which is why their use is limited in some places.

Among the advantages of speed bumps are the following:

Effectively reducing the speed of traffic in the place of speed bumps

Using this type of equipment reduces the attractiveness of travelling on residential streets, and drivers are encouraged to use arterial roads.

The average daily volume of traffic on local streets is reduced, and this volume is transferred to arterial roads.

In general, speed bumps are helpful for speed control in traffic environments. Because of the mentioned advantages, they are recommended for use in streets, roads, parking lots and areas that need speed control.

You can find the accelerators in different dimensions in the Farto Traffic store and order each according to your needs.